Turbosmart Dual Port Blow Off Valve for Subaru
Dual Port Blow Off Valve for Subaru
No Reviews - Write a Review
Turbosmart
***All Blow Off Valves require a fitting kit unless otherwise stated***
Features
- Three BOVs in one
- Dual ports with sequence timing allow quieter operation during normal driving loads with the benefit of a Supersonic during race conditions
- Dual Port can be configured to vent to atmosphere, back into air intake or both
- Supplied with parts to convert between Plumb Back and Supersonic
Tech Tip
To adjust the Turbosmart BOV, rotate the cap in the SOFT direction up to, but not beyond, the indicator groove. With the engine at idle, the exhaust port should be closed off by the piston. Free rev the engine and back off quickly. The engine should return to normal idle speed - if the revs drop below idle or engine stalls, increase the spring tension by half a turn. Repeat until the engine free revs and returns to normal idle speed. Test drive the car. If the engine backfires or stalls upon deceleration or gear changes, check all BOV connection, prior to increasing the the spring tension again.
Fitment
- Impreza Turbo 7/97-00 - Requires fitting kit TS-0205-2051
- Impreza WRX/STi 01-07 No fitting kit required
- Impreza WRX 08- No fitting kit required
- Impreza STi 08- No fitting kit required
- Forester Turbo GT 98-00 - Requires fitting kit TS-0205-2051
- Forester Turbo GT 01-02 - Requires fitting kit TS-0205-2053
- Forester XT 03-04 - Requires fitting kit TS-0205-2054
- Forester XT 05-07 - No fitting kit required
- Forester Turbo 08 on - No fitting kit required
- Legacy GT 03-08 - No fitting kit required
Manufacturer part no: TS-0205-1061, TS-0205-1015, TS-0205-1009
